Skip to content

Headlight kits

SONAX 04059410 restoration set, 85 ml

A two-step manual kit that finishes with a sealant — the step that decides whether the result lasts months or a season.

SONAX headlight restoration set

SONAX 04059410 restoration set, 85 ml

A two-step manual kit that finishes with a sealant — the step that decides whether the result lasts months or a season.

Volume
85 ml, stated
Application
Manual, stated
Removes
Yellowing, matting and fine scratches, stated, in 2 steps
Protection
Durable sealant against renewed fading, stated
Amazon reference
B01B16LP4G
EAN
4064700405943
  • A sealant included, which is what separates a lasting result from a temporary one
  • Manual application — no machine, no drill, no risk of burning the lens
  • Manual work on a badly degraded lens is slow

Best for: Lightly hazed lenses, where polishing and sealing is enough without sanding.

Check price on Amazon

Specifications

Volume
85 ml, stated
Application
Manual, stated
Removes
Yellowing, matting and fine scratches, stated, in 2 steps
Protection
Durable sealant against renewed fading, stated
Amazon reference
B01B16LP4G
EAN
4064700405943

What lands on the bench

An 85 ml two-step manual headlight restoration set with a protective sealant.

The two-step approach

Polish, then seal. It suits lenses that have hazed rather than gone rough, and it avoids the risk of sanding — which is real for anyone doing it for the first time.

What the sealant is doing

Replacing the protection you just removed. A polished lens with no coating yellows faster than it did before, and every honest kit in this category addresses that.

Where it will not be enough

A lens that is rough to the touch or deeply yellowed. That needs an abrasive progression, and the sanding kits here are the answer.

Availability

Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.

Prices and availability are what Keepa reported on the date this page was updated; both move.

The questions that reach us

Do I need to sand first?

On light hazing, no — a polish and a sealant restore it. On a lens that is genuinely yellow and rough, an abrasive progression is needed, and that is what the sanding kits here provide.

Why does the sealant matter so much?

Because what failed was the factory UV coating. Polishing removes what is left of it; without a new protective layer the lens degrades faster than before.

Tools this fits

More headlight restoration kits

  • ZMHUM no sanding car headlight restoration kit with applicator

    ZMHUM No-sanding kit, 180 ml

    A chemical kit with no abrasive, and the only listing here that publishes a cure time.

    Method
    Chemical wipe-on — no sanding, no drill
    Cure
    Keep dry for the first 24 hours — the only cure condition on this shelf
    Volume
    180 ml, stated to treat 8 or more sets
    Cost per car
    About $2.12 at the stated coverage
    Coating
    Ceramic sealant, stated hydrophobic and UV blocking
    Supplied
    Sponge applicator, UV protective agent, microfibre towel
    Stated vehicles
    Cars, trucks, motorcycles, SUVs and motorhomes
    Bullets
    Nine; four carry a specification
    Abrasive
    None
    Durability period
    NOT PUBLISHED
    Split of the 180 ml
    NOT PUBLISHED
    Chemical identity
    NOT PUBLISHED
    Amazon reference
    B0HK7X17ZL
    EAN
    0739067157067
    • The only kit on this shelf that publishes a cure condition — 24 hours dry
    • 180 ml for 8+ sets, about $2.12 a car and the best coverage here
    • Removes nothing: a chalked factory coating stays under the new one

    Best for: A lightly hazed lens, and a dry forecast for the following day

    Check price on Amazon
  • 3M 39194 headlight restoration kit with Trizact discs and wipes

    3M 39194, Trizact 1000 and 3000

    The cheapest kit here that replaces the clear coat, with named Trizact abrasives and a Hookit pad.

    Abrasive
    3M Trizact refining discs, 1000 and 3000 grit, 76 mm (2.99 in), one of each
    Protection
    Two 3M Quick Headlight Clear Coat Wipes
    Pad
    76 mm (2.99 in) foam with 3M Hookit hook-and-loop attachment
    Gloves
    One disposable
    Method
    By hand, or with a common household drill
    Stated lenses
    Headlights, tail lights, fog lights, indicators
    Weight
    70 g (2.5 oz)
    Price
    $9.49 — the cheapest kit on this shelf
    Durability period
    NOT PUBLISHED
    Cure time
    NOT PUBLISHED
    Masking tape
    None
    Grade below 1000
    None
    Amazon reference
    B08744Z3TD
    EAN
    0051131391949
    • Supplies a clear coat, where the $44.99 3M kit supplies wax
    • Named Trizact structured abrasives rather than a bare grit number
    • A 2000-grit jump from 1000 to 3000, which this shelf warns about

    Best for: One pair of lightly hazed lenses, with the coating actually replaced

    Check price on Amazon
  • 3M Ultra 39195 headlight restoration kit three pack with sanding discs

    3M 39195, three kits, 500/800/3000

    Three kits, the coarsest abrasive on this shelf, the only masking tape — and a wax rather than a clear coat.

    Kits
    Three complete kits — about $15.00 each
    Abrasive grades
    500, 800 and 3000 grit — the coarsest start on this shelf
    Largest grit jump
    2200, from 800 to 3000 — the largest here
    Pad
    3.25 in (83 mm) disc pad holder — the largest here
    Masking tape
    Included — the only kit on this shelf with any
    Protection
    Wax protectant — not a UV-resistant clear coat
    Method
    By hand or with a common household drill
    Stated lenses
    Headlights, tail lights, fog lights, indicators
    Durability period
    NOT PUBLISHED
    Cure time
    NOT PUBLISHED
    Disc count per kit
    NOT PUBLISHED
    Gloves
    None
    Amazon reference
    B0HBZ4T2NK
    EAN
    0199874481036
    • The only kit on this shelf that supplies masking tape
    • 500 grit, the only grade here that will cut a chalky lens in one pass
    • A wax protectant rather than a UV clear coat, which this shelf sorts against

    Best for: A ruined lens that needs 500 grit, with a clear coat bought separately

    Check price on Amazon

Others worth a spot in the toolbox

  • Schumacher Electric 3 m jump leads

    Schumacher Electric 3 m (10 ft) 16 mm (0.63 in)² leads

    The compact pair: three meters and 16 mm (0.63 in)², which suits a small car and stores in a door pocket rather than a boot.

    Length
    3 m (10 ft), stated
    Conductor
    16 mm (0.63 in)² copper-coated aluminum, stated
    Voltages
    6 V, 12 V and 24 V, stated
    Amazon reference
    B0F1FL58L8
    EAN
    5425038532593
    • Publishes length, section and material — all three
    • 24 V capability at the lowest price here
    • 16 mm (0.63 in)² is the smallest section here and limits current accordingly

    Best for: A small petrol car, where compactness matters more than capacity.

    ≈ $87
    Check price on Amazon
  • Griot’s Garage 6.5 inch BOSS correcting foam pads, pack of two

    Griot’s Garage 6.5 in BOSS correcting, pack of 2

    The biggest pad on this shelf, and the only one with a hole through the middle to shed heat.

    Diameter
    6.5 in (165 mm) — the largest on this shelf
    Foam
    Firm Euro foam, low profile
    Cooling
    Center hole through the pad to reduce heat build-up
    Bonding
    Thermo-set, stated to resist separation
    Backing
    Premium loop
    Stated cut level
    Light to moderate defects, with BOSS correcting creams
    Also offered in
    1, 2, 3 and 5.5 in
    Washability
    Machine washable
    Pack
    2
    Pad thickness
    NOT PUBLISHED
    Density figure
    NOT PUBLISHED
    Intended plate size
    NOT PUBLISHED
    Amazon reference
    B0102RA38O
    EAN
    0874596007701
    • The only pad on this shelf with a cooling hole through the middle
    • Firm and low profile, which is the configuration that cuts on a DA machine
    • 6.5 in is unwieldy on bumpers, mirrors and around badges

    Best for: Bonnets, roofs and doors, with a smaller pad for everything else

    Check price on Amazon
  • Griot’s Garage BOSS 5.5 inch microfibre polishing pads, pack of two

    Griot’s Garage 5.5 in BOSS microfibre, pack of 2

    The only microfibre pad on this shelf, with both its face and its foam layer measured.

    Face
    9 mm (0.35 in) white microfibre, stated to resist matting
    Interface
    Integrated Innerflex euro-foam, for body lines and contours
    Foam layer
    1/4 in (6.4 mm) high-rebound, for fast pad rotation
    Diameter
    5.5 in (140 mm) — matches the 5 in plate on this shelf
    Stated cut level
    Moderate to severe scratches and oxidation, with BOSS creams
    Also offered in
    1, 2, 3, 5 and 6 in
    Cleaning
    By hand or machine, with the maker’s pad cleaner
    Pack
    2
    Weight
    35 g (1.2 oz), from the shipping record
    Fiber composition
    NOT PUBLISHED
    Maximum speed
    NOT PUBLISHED
    Washing temperature
    NOT PUBLISHED
    Amazon reference
    B0102RA1RC
    EAN
    0874596007633
    • The only microfibre pad on this shelf, for clear coats foam cannot cut
    • The only published thicknesses here — 9 mm (0.35 in) of pile, 1/4 in of foam
    • Microfibre finishes rougher than foam, so a finishing pass is still needed

    Best for: A hard clear coat with real scratches, before a finishing pad

    Check price on Amazon

All headlight restoration kits

Prices quoted in these summaries are dated readings. The live price is shown next to each product.