Dust extraction is half the tool, and all of the finish · review
A 125 mm (4.92 in) air random orbit sander at 12,000 rpm with a 5 mm (0.20 in) orbit — the fine throw that suits paint rather than timber.
The last word The right orbit for paint, with the compressor question unanswered.
A 125 mm (4.92 in) pneumatic random orbit sander running at a stated 12,000 rpm with a 5 mm (0.20 in) eccentric orbit and an all-steel rotor.
Five millimeters is a finishing throw. On filler and primer it leaves a scratch pattern fine enough to paint over after the correct abrasive progression, which is the whole purpose of a body sander as distinct from a wood sander.
Air consumption in liters per minute. Without it, matching the tool to a compressor is guesswork, and a starved air sander runs slowly and inconsistently.
Abrasive discs with a hole pattern that matches the pad, and an extractor if you intend to sand indoors.
Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Power source | Compressed air, stated |
|---|---|
| Pad | 125 mm (4.92 in), stated |
| Speed | 12,000 rpm, stated |
| Orbit | 5 mm (0.20 in) eccentric, stated |
| Rotor | High-precision all-steel, stated |
| Balance | Precision balanced for low vibration and noise, stated |
| Amazon reference | B0DFPKWMF6 |
| EAN | 0795973839831 |
Because bodywork wants a fine finish. A small orbit leaves a finer scratch pattern, which is what you want before primer and paint; a larger orbit removes material faster and leaves more to correct.
Air consumption is not published, which is the recurring gap on pneumatic tools. Ask before assuming a small workshop compressor will keep it running continuously.
7.5/ 10
The right orbit for paint, with the compressor question unanswered.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
Paint preparation in a garage that already has compressed air.
Listed because the attachment names this tool by name.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Air · three pad sizes 25, 50 and 75 mm (2.95 in) · low air consumption stated · low noise · one-handed
Three pad sizes in one kit — 25, 50 and 75 mm (2.95 in) — which is what makes a mini sander cover a stone chip and a whole repair patch.
Best for: Spot repairs of varying sizes, on a garage compressor that is not large.
Air · square palm · 10,000 rpm · extraction hose and dust bag · 15 sheets at 1500, 2000 and 3000 · US connector
The only sander on this shelf with dust extraction, which is the specification the shelf calls decisive.
Best for: Flatting primer and clear coat without filling the garage with dust
6 in hook-and-loop · air palm · internal silencing · built-in regulator · metal touch trigger · 1/4 NPT · 1.85 lb · 10 discs
The lightest sander on this shelf at 839 grams, with internal silencing and a trigger that modulates.
Best for: A long session on a door or a wing, in a garage where noise matters
