The value comes from the vehicle maker; the wrench repeats it · review
All three drives and all three ranges in one case — from 1 Nm to 220 Nm, which covers everything on a car that has a published value.
The last word Complete coverage, undocumented accuracy. That is the trade, and it is worth stating plainly.
Three click torque wrenches — 1/4, 3/8 and 1/2 inch — covering 1–25, 5–60 and 20–220 Nm, with 72-tooth reversible heads, in one 47-piece case.
Coverage. Every fastener on a normal car with a published torque value falls somewhere in those three ranges, and buying them separately costs considerably more.
Accuracy, and the standard behind it. Elsewhere in this hub, ±3% to ISO 6789-1 is stated; here nothing is. That is the difference to weigh, because a torque wrench with an unknown tolerance is a wrench you cannot argue with.
Store each wound back to its lowest graduated setting. Use each in the middle of its range. Never undo a fastener with any of them.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Drives | 1/4, 3/8 and 1/2 inch, stated |
|---|---|
| Ranges | 1–25 Nm, 5–60 Nm and 20–220 Nm, stated |
| Pieces | 47, including 1/2 inch accessories, stated |
| Ratchet | 72-tooth, reversible in both directions, stated |
| Setting | Pull-down locking knob; audible click at the preset value, stated |
| Amazon reference | B0G4R1X9JP |
| EAN | 0037635102984 |
It covers the same ranges. What it does not publish is a tolerance for any of them, and on a measuring instrument that is the specification. Compare it against a single wrench that states ±3% before deciding.
The 20–220 Nm for wheels, by a distance. The 5–60 Nm next, for engine-bay work. The 1–25 Nm rarely, and usually on something delicate.
8.4/ 10
Complete coverage, undocumented accuracy. That is the trade, and it is worth stating plainly.
A reference exists on these Amazon stores: France, Germany, Italy, Spain. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
Covering the whole range at once, where documented accuracy is not the priority.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
3/8 inch · 5–60 Nm in 0.5 Nm steps · ±3% stated, calibrated to ISO 6789-1:2017 · 27-piece · quick lock
The one that publishes both numbers: ±3% accuracy, calibrated to ISO 6789-1:2017 — the standard that defines what a torque wrench accuracy claim means.
Best for: Anyone who wants a documented tolerance rather than a claim.
1/2 inch · 28–210 Nm · 475 mm (18.7 in) · TÜV/GS stated · with 17, 19, 21 mm (0.83 in) sockets and a 125 mm (4.92 in) extension
The wheel-change set: a 1/2 inch wrench covering 28 to 210 Nm with the three sockets wheel bolts actually use, TÜV tested with a GS mark.
Best for: Changing your own wheels, which is what most torque wrenches are bought for.
≈ $140
3/8 inch · 5–60 Nm in 0.5 Nm steps · 27-piece with Torx, hex and spline bits · audible release
The low-range wrench: 5 to 60 Nm in half-newton steps, with the bit set that engine-bay and interior fasteners actually need.
Best for: Engine covers, sensors, brackets and anything into aluminum or plastic.
