Dust extraction is half the tool, and all of the finish · review
A mini pneumatic sander supplied with its consumables: thirty polishing discs, fifteen abrasive sheets and three backing plates.
The last word A spot-repair tool that arrives ready to work. Not the machine for a panel.
A mini pneumatic sander and polisher rated at a stated 15,000 rpm, with thirty polishing discs, fifteen abrasive sheets, three backing plates and the tools to change them.
Recesses, edges, arch lips and repairs the size of a coin. A 125 mm (4.92 in) pad cannot follow those shapes, and a mini tool is the only practical way to work them without going to hand sanding.
Included, and they are the reason this kit is usable immediately. They are also a starting supply — plan on ordering more with the tool.
Orbit size and air consumption. The first affects finish; the second decides whether your compressor can keep it running.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Power source | Compressed air, stated |
|---|---|
| Speed | 15,000 rpm no-load, stated |
| Included | 30 polishing discs, 15 abrasive sheets, 3 backing plates, screw and wrench — stated |
| Construction | Stated as robust, wear-resistant and light |
| Amazon reference | B0D12NPD47 |
| EAN | 0730140426001 |
Small areas: a stone chip repair, an edge, a section next to a trim line, the inside of a wheel arch lip. It is a complement to a 125 mm (4.92 in) machine rather than a replacement.
For a spot repair or two. Abrasives are consumables in the true sense, and thirty discs is a starting supply rather than a stock.
7.5/ 10
A spot-repair tool that arrives ready to work. Not the machine for a panel.
A reference exists on these Amazon stores: France, Germany, Italy, Spain. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
Spot repairs, edges and areas a full-size sander cannot reach.
Amazon reports what buyers took in the month before this page was last checked: at least 50.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Air · three pad sizes 25, 50 and 75 mm (2.95 in) · low air consumption stated · low noise · one-handed
Three pad sizes in one kit — 25, 50 and 75 mm (2.95 in) — which is what makes a mini sander cover a stone chip and a whole repair patch.
Best for: Spot repairs of varying sizes, on a garage compressor that is not large.
Air · square palm · 10,000 rpm · extraction hose and dust bag · 15 sheets at 1500, 2000 and 3000 · US connector
The only sander on this shelf with dust extraction, which is the specification the shelf calls decisive.
Best for: Flatting primer and clear coat without filling the garage with dust
6 in hook-and-loop · air palm · internal silencing · built-in regulator · metal touch trigger · 1/4 NPT · 1.85 lb · 10 discs
The lightest sander on this shelf at 839 grams, with internal silencing and a trigger that modulates.
Best for: A long session on a door or a wing, in a garage where noise matters
