A jack lifts a car; it never holds one · review
The only jack here that names its standard: TÜV Rheinland and GS certification to EN 1494, plus a stated five-year warranty.
The last word The certification is the product. Everything else on this shelf asks you to trust a printed number.
A 3 t trolley jack with a 75–505 mm (2.95 to 19.9 in) range, TÜV Rheinland and GS certification stated to EN 1494, a Quicklift pump, a German manual and a stated five-year warranty.
Every jack here prints a tonnage. Only this one names the standard the tonnage was declared against and the body that tested it. On a tool whose failure mode involves a car, that is not a marketing distinction.
Permission to work under a car on the jack alone. Certification describes a new tool used as intended, on level ground, loaded at its designed point. Axle stands are still what holds a vehicle.
Stated by the maker, and unusually long for this shelf. On a tool used a few times a year for a decade, a warranty is a statement about expected life as much as a promise.
Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Rated capacity | 3 t, stated |
|---|---|
| Height range | 75–505 mm (2.95 to 19.9 in), stated |
| Certification | TÜV Rheinland and GS certified, stated to meet EN 1494 |
| Pump | Quicklift system, stated |
| Documentation | German manual, stated |
| Warranty | 5 years, stated by the maker |
| Amazon reference | B0F4YQP89B |
| EAN | 4270004701104 |
It is the European standard for mobile jacks and associated lifting equipment. A rating declared against it was established by a defined method with defined safety factors, which is what makes two ratings comparable at all.
CE marking is a manufacturer’s declaration of conformity. GS — geprüfte Sicherheit — involves a third-party test body. On lifting equipment that difference is worth paying for.
8.7/ 10
The certification is the product. Everything else on this shelf asks you to trust a printed number.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United States. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
Anyone who wants the standard named, and who intends to keep the jack for a decade.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Rated 3 t · 75–505 mm (2.95 to 19.9 in) · dual hydraulic system · foam-padded handle · 2 interchangeable rubber pads
Three metric tons, an entry height of 75 mm (2.95 in) and a 505 mm (19.9 in) lift — the widest published range here, with a dual pump that reaches it in fewer strokes.
Best for: Anyone lifting more than one car, and anyone whose car sits low at the front.
Rated 2 ton (4,000 lb) · 130–330 mm (5.12 to 13 in) · overload release valve · swivel castors · states it must not be used as a stand
The only listing on this shelf that prints the refusal: a jack lifts, and a stand holds.
Best for: A hatchback or estate with real clearance, from someone who reads the note
Rated 3 t · 75–505 mm (2.95 to 19.9 in) · dual-cylinder Quicklift · 2 non-slip rubber pads · 4 castors (2 fixed, 2 steering)
A 3 t low-profile jack with a dual-cylinder quick-lift system and two rubber pads, aimed squarely at lowered cars, estates and SUVs.
Best for: Someone who wants the low-profile range without paying for the certificate.
