Nozzle size decides the material, whatever the badge says · review
Three guns in an aluminum case with stainless nozzles — the set that covers primer, base and detail without changing anything.
The last word Stainless nozzles and three guns. Ask for the sizes before ordering.
Three HVLP guns with stainless nozzles in an aluminum case, stated for good atomization with low overspray.
High volume, low pressure: more air at lower pressure, which puts more paint on the panel and less into the air. It is the reason these guns need a compressor that can supply volume rather than pressure.
Nozzle sizes. Three guns without published sizes is three unknowns, and it is the one question to settle with the seller.
Stainless nozzles. If you spray anything waterborne, that is the specification that decides whether the gun lasts a season or a decade.
Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Guns | 3, stated |
|---|---|
| Type | HVLP — high volume, low pressure, stated |
| Nozzles | Stainless steel, stated as rust-free |
| Atomization | Stated as good, with low overspray |
| Case | Aluminum, stated |
| Amazon reference | B08K92FB1F |
| EAN | 4251379455427 |
It should be. Without it, the only way to know what each gun suits is to measure on arrival — which is a real gap in an otherwise complete set.
For waterborne paints, yes: plain steel corrodes and contaminates the finish. It is the one material specification worth insisting on in this family.
7.8/ 10
Stainless nozzles and three guns. Ask for the sizes before ordering.
A reference exists on these Amazon stores: Germany, United States. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
Someone equipping for a full repair rather than a single coat.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
HVLP · 3 stainless nozzles 1.4, 1.7 and 2.0 mm (0.08 in) · conical air cap · mesh filter
Three stainless nozzles covering base coat through primer, with a mesh filter that keeps dirt out of the fluid passage.
Best for: A first spray gun for a small job, where nozzle flexibility matters more than refinement.
LVLP · complete set with pressure regulator and oil/water separator · stated high transfer efficiency
An LVLP gun sold as a complete starting kit: regulator, oil and water separator and gun together — the three things a spray job actually needs.
Best for: A first spray setup on a small compressor, where the accessories would otherwise be a second order.
≈ $120
Two guns · nozzles 0.8 mm (0.03 in) and 1.4 mm (0.06 in) · cups 125 ml and larger · sorting case
Two guns rather than one gun with two nozzles: a 0.8 mm (0.03 in) detail gun and a 1.4 mm (0.06 in) panel gun, each with its own cup.
Best for: Spot repairs and small panels, where a full-size gun is too much.
