Nozzle size decides the material, whatever the badge says · review
Three stainless nozzles covering base coat through primer, with a mesh filter that keeps dirt out of the fluid passage.
The last word Three nozzles and a filter. Ask the seller for the air consumption before buying a compressor to match.
An HVLP gravity gun with three stainless nozzle and needle sets — 1.4, 1.7 and 2.0 mm (0.08 in) — a conical air cap and a mesh filter.
A gun with one nozzle sprays one kind of material well. Three sizes covers primer, base and clear, which is the whole job rather than a third of it.
A mesh filter in the cup catches what settles in a tin. Most “orange peel and specks” complaints are contamination, not technique.
Air consumption. HVLP guns move a lot of air at low pressure, and the liters per minute figure is what has to sit inside your compressor’s continuous output. It is not published here.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Type | HVLP, stated |
|---|---|
| Nozzles | 1.4, 1.7 and 2.0 mm (0.08 in) stainless needles and nozzles, stated |
| Air cap | Conical shape, stated to prevent spitting |
| Filter | Mesh filter to remove dirt particles, stated |
| Amazon reference | B0BBFVLLPL |
| EAN | 6974232140428 |
Broadly, finer nozzles for base coats and clears, larger for primers and fillers — and the paint manufacturer publishes a recommended range on the technical data sheet. That sheet is the authority, not a general rule.
Waterborne paints corrode plain steel. Stainless is the material to insist on if you are spraying anything water-based, which increasingly means most refinish products.
7.2/ 10
Three nozzles and a filter. Ask the seller for the air consumption before buying a compressor to match.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
A first spray gun for a small job, where nozzle flexibility matters more than refinement.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
LVLP · complete set with pressure regulator and oil/water separator · stated high transfer efficiency
An LVLP gun sold as a complete starting kit: regulator, oil and water separator and gun together — the three things a spray job actually needs.
Best for: A first spray setup on a small compressor, where the accessories would otherwise be a second order.
≈ $120
Two guns · nozzles 0.8 mm (0.03 in) and 1.4 mm (0.06 in) · cups 125 ml and larger · sorting case
Two guns rather than one gun with two nozzles: a 0.8 mm (0.03 in) detail gun and a 1.4 mm (0.06 in) panel gun, each with its own cup.
Best for: Spot repairs and small panels, where a full-size gun is too much.
HVLP · 3 copper nozzles 1.4, 1.7 and 2.0 mm (0.08 in) · 360° rotatable · aluminum body
The same three-nozzle format in copper rather than stainless, in an aluminum body — and the nozzles rotate, which lets the fan be turned without moving the cup.
Best for: Someone spraying solvent-based materials who wants fan control.
