Nozzle size decides the material, whatever the badge says · review
The same three-nozzle format in copper rather than stainless, in an aluminum body — and the nozzles rotate, which lets the fan be turned without moving the cup.
The last word Fan control and an aluminum body. Check your paint system against copper nozzles.
An HVLP gun with three copper nozzles at 1.4, 1.7 and 2.0 mm (0.08 in), rotatable through 360°, in an aluminum body.
Spraying a door means horizontal passes; spraying a sill means vertical ones. Turning the fan rather than the gun keeps your wrist where it should be, and it keeps the overlap consistent.
Copper nozzles are softer and less resistant to waterborne materials than stainless. For solvent-based paints they are entirely normal; for waterborne systems, stainless is the safer specification.
The air the gun consumes, and whether your compressor supplies it continuously.
Not found on the American Amazon store, where the buy link falls back to a local search rather than to a page that does not exist.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Type | HVLP, stated |
|---|---|
| Nozzles | 3 copper nozzles, 1.4, 1.7 and 2.0 mm (0.08 in), rotatable through 360°, stated |
| Body | Aluminum, stated as more durable than cheap mini guns |
| Atomization | Stated as ultra-fine |
| Amazon reference | B0G6D3CC4N |
| EAN | 0716404236760 |
It turns the fan between horizontal and vertical without moving the gun. Vertical panels are sprayed with horizontal passes and a vertical fan, and being able to switch is what keeps the pattern right on both.
Stainless resists waterborne paints; copper is fine with solvent-based materials and is softer. If your paint system is waterborne, choose stainless.
7.8/ 10
Fan control and an aluminum body. Check your paint system against copper nozzles.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
Someone spraying solvent-based materials who wants fan control.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
HVLP · 3 stainless nozzles 1.4, 1.7 and 2.0 mm (0.08 in) · conical air cap · mesh filter
Three stainless nozzles covering base coat through primer, with a mesh filter that keeps dirt out of the fluid passage.
Best for: A first spray gun for a small job, where nozzle flexibility matters more than refinement.
LVLP · complete set with pressure regulator and oil/water separator · stated high transfer efficiency
An LVLP gun sold as a complete starting kit: regulator, oil and water separator and gun together — the three things a spray job actually needs.
Best for: A first spray setup on a small compressor, where the accessories would otherwise be a second order.
≈ $120
Two guns · nozzles 0.8 mm (0.03 in) and 1.4 mm (0.06 in) · cups 125 ml and larger · sorting case
Two guns rather than one gun with two nozzles: a 0.8 mm (0.03 in) detail gun and a 1.4 mm (0.06 in) panel gun, each with its own cup.
Best for: Spot repairs and small panels, where a full-size gun is too much.
