The only tool here that stores energy while you work · review
A universal MacPherson set stated to suit both conical and cylindrical springs — which is the shape question a clamp has to answer.
The last word Names the spring shapes and little else. The rating is the question to ask.
A universal MacPherson strut compressor set, stated for both conical and cylindrical springs.
Spring shape. A conical spring narrows towards one end, and clamps that seat well on a cylindrical coil can sit badly on a conical one. Naming both is more informative than “universal”.
Load rating, span, claw design. Three specifications that competitors publish at similar prices.
Even winding by hand, seated claws, nobody in line with the spring, and the vehicle manual for everything else.
Listed but with no offer on the American Amazon store — the reference exists there and nobody is currently selling it.
Prices and availability are what Keepa reported on the date this page was updated; both move.
| Type | Universal MacPherson strut compressor set, stated |
|---|---|
| Application | Fast and correct removal and refitting of struts, stated |
| Spring shapes | Suitable for most MacPherson struts with conical and cylindrical springs, stated |
| Amazon reference | B08KSV1VHP |
| EAN | 0793345498150 |
A conical spring has coils of different diameters, so a clamp that seats correctly at one end may not at the other. A tool stated for both shapes has been designed for that variation.
Only as far as the published dimensions go, and here none are published. Treat it as a description rather than a specification, and check the tool against the spring before committing.
8.4/ 10
Names the spring shapes and little else. The rating is the question to ask.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on September 4, 2026.
A strut with a conical spring, where clamp geometry is the constraint.
Specifications: the manufacturer sheet for garage tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
300 mm (11.8 in) span · 1050 kg (2314.9 lb) / 10,200 N stated · universal for most vehicle types
A MacPherson compressor with both a mass and a force rating published — 1050 kg (2314.9 lb) and 10,200 N, which is unusually complete.
Best for: A standard strut job where the published rating covers the spring.
≈ $95
2 pieces · jaw capacity 70–270 mm (2.76 to 10.6 in) stated · 1200 kg (2645.5 lb) · drop-forged interlocking safety claws · heat-treated 45# carbon steel
The set that publishes a rated load and describes its safety claws: 1200 kg (2645.5 lb), drop-forged interlocking claws and a reinforced spindle.
Best for: Anyone who wants the load rating and the claw design stated before starting.
≈ $57
2 pieces · 370 mm (14.6 in) span · 4 claws · CR-V steel stated
A pair of external clamps with a 370 mm (14.6 in) span — the entry point to a job that stores enough energy to injure, and the point at which the manual matters most.
Best for: A single suspension job, done to the manufacturer’s procedure and no faster.
